What it means
HE is Samsung's heater error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. If it recurs, switch it off at the breaker and book a technician with us.
Samsung dishwasher HE / Sensors
HE is Samsung's heater error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. If it recurs, switch it off at the breaker and book a technician with us.
Also shown as HE
HE is Samsung's heater error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. If it recurs, switch it off at the breaker and book a technician with us.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
HE recurs after the normal cycle.
Your Samsung checks, remembered on this device

Compare the display with HE one character at a time: Samsung writes it with a capital H and a capital E.

Remove the dishes.

Put detergent in the dispenser.

Start a Normal cycle and see whether the code returns.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
Samsung names the dishwasher heater in two error entries.
Read the definitionSamsung says the temperature inside is detected incorrectly.
Read the supporting manualEmpty the dishwasher, add detergent and run a normal cycle.
Read the supporting manualSwitch off at the breaker if the code recurs, and let the tub cool before you reach in.
Read the supporting manualThe same characters also appear on a dryer, where Samsung ties it to Heating errors; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for HE is printed as: "HE - Heater error" (TSG10004499, web article).
Samsung says the temperature inside is detected incorrectly.
No. Samsung lists them separately: this one is a temperature detected incorrectly, the other a temperature too hot.
The same characters also appear on a dryer, where Samsung ties it to Heating errors; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.
If it recurs, Samsung says to switch off power at the breaker and request service. Book a visit with us.
Samsung codes, symptoms, parts, house calls
3C is Samsung's pump operation error on a dishwasher: the pump has failed. Turn the dishwasher off and try the cycle again. Book a technician with us if the error still occurs.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Samsung names the dishwasher heater in two error entries. HC is a high temperature heater error: it is too hot inside. HE is a heater error: the temperature is detected incorrectly. Both start with an empty dishwasher and a Normal cycle; cut breaker power if HE returns.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.