Inside the appliance
Dishwasher control panel. In plain English.
Samsung names the dishwasher control panel in two error entries. CE is a communication error: the panel cannot communicate with the rest of the dishwasher. bE and 6E are a button error: the panel detects a stuck button. Turn it off and restart, or touch every button.

Where it fits.
Dishwasher control panel in the appliance
Samsung's article does not describe where the panel sits.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher control panel problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Turn it off and restart
For CE, turn the dishwasher off and try to start it again.
- 2
Touch every button
For bE and 6E, turn the dishwasher off, then touch every button on the panel.
- 3
Watch for a dead button
If a button misbehaves, or the code returns after power-up, note which one.
- 4
Note the display
Write down whether anything on the display lights. A visit starts from that.
Cleaning or replacement?
Leave internal testing to a technician.
CE continues after you turn it off and restart.
A button does not respond, or bE or 6E returns after power-up.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher control panel advice. Choose the manual that fits your model.
- Samsung dishwasher is displaying an error code
Follow the user manual for your exact model. See how we research these pages.
What does CE mean?
Samsung calls it a communication error: the control panel is unable to communicate with the rest of the dishwasher.
What does bE or 6E mean?
A button error: the panel detects a stuck button. Turn it off and touch each button on the panel, per Samsung.
What if a button does not work?
Samsung's wording: a button that misbehaves, or a code coming back after power-up, means a service request.
Should I keep starting cycles?
Samsung's steps are one restart and a button check. If the error stays, stop there and send us a request instead.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
CE
CE is Samsung's communication error on a dishwasher: the control panel cannot communicate with the rest of it. Turn the dishwasher off and start it again. Book a technician with us if it continues.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.


