Samsung dishwasher bE / User interface

Samsung dishwasher
error bE

Dishwasher / display referencebE

bE is Samsung's button error on a dishwasher: the panel detects a stuck button. Turn the dishwasher off and touch every button on the panel. Book a technician with us if a button does not work or the code returns.

Also shown as bE

Last reviewed

Dishwasher / display referencebE
Meaning
bE is Samsung's button error on a dishwasher: the panel detects a stuck button. Turn the dishwasher off and touch every button on the panel. Book a technician with us if a button does not work or the code returns.
Who handles it
Check, then book
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher bE means.

What it means

bE is Samsung's button error on a dishwasher: the panel detects a stuck button. Turn the dishwasher off and touch every button on the panel. Book a technician with us if a button does not work or the code returns.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

BE returns after every button has been touched.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher bE: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with bE one character at a time: Samsung writes it with a lowercase b and a capital E.

  2. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 2

    Turn it off

    Switch the dishwasher off.

  3. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Touch every button

    Press each button on the panel so none stays down.

  4. A technician testing a control board with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Power on

    Turn it back on and see whether the code returns.

Still showing bE?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

A finger pressing one of the touch buttons on the top-edge control panel of a partly open built-in dishwasher

Component reference

Dishwasher control panel

Samsung names the dishwasher control panel in two error entries.

Read the definition

A little more context.

What is a Samsung dishwasher reporting with bE?

Samsung says the panel detects a stuck button. The printed steps are to turn the dishwasher off and touch every button.

Read the supporting manual

What should I check before I book a visit?

Turn off the dishwasher, then touch every button on the panel, and turn it back on.

Read the supporting manual

How is bE different from the codes near it?

6E differs from bE only by a look-alike character, b against 6. Samsung lists both under Button error, so they carry the same meaning.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for bE is printed as: "bE, 6E - Button error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with bE?

Samsung says the panel detects a stuck button. The printed steps are to turn the dishwasher off and touch every button.

Are the lights version of this code the same?

Samsung lists several blinking-light patterns that mean a stuck button on models without a digital display.

Can a wet panel cause a stuck-button code?

Samsung gives no cause. Water on a control panel is a sensible thing to dry off, but the printed fix is to touch every button after turning the dishwasher off.

What if only one button seems dead?

Samsung says that if any buttons are not working correctly, or the code returns after turning the dishwasher back on, you should request service.

Is bE the same as 6E?

6E differs from bE only by a look-alike character, b against 6. Samsung lists both under Button error, so they carry the same meaning.

Do I need a visit for bE?

If any button is not working correctly or the code returns after power-on, Samsung says to request service. Book a visit with us.

Let’s take care of it.

Smart appliances still
need a steady hand.