What it means
CE is Samsung's communication error on a dishwasher: the control panel cannot communicate with the rest of it. Turn the dishwasher off and start it again. Book a technician with us if it continues.
Samsung dishwasher CE / Control board
CE is Samsung's communication error on a dishwasher: the control panel cannot communicate with the rest of it. Turn the dishwasher off and start it again. Book a technician with us if it continues.
Also shown as CE
CE is Samsung's communication error on a dishwasher: the control panel cannot communicate with the rest of it. Turn the dishwasher off and start it again. Book a technician with us if it continues.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
CE comes back after the restart.
Your Samsung checks, remembered on this device

Compare the display with CE one character at a time: Samsung writes it with a capital C and a capital E.

Switch the dishwasher off, or cut power at the breaker.

Turn it on and start a cycle.

Write down whether the display lights at all.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
Samsung names the dishwasher control panel in two error entries.
Read the definitionSamsung says the control panel is unable to communicate with the rest of the dishwasher.
Read the supporting manualTurn the dishwasher off and try to start it again.
Read the supporting manualCut power at the breaker before you reach behind the panel. Do not open the control board.
Read the supporting manualThe same characters also appear on a washer, where Samsung ties it to Hot/cold error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for CE is printed as: "CE - Communication error" (TSG10004499, web article).
Samsung says the control panel is unable to communicate with the rest of the dishwasher.
Yes, Samsung lists all four or more lights blinking for this, with a two-minute breaker power-off.
The same characters also appear on a washer, where Samsung ties it to Hot/cold error. Check which appliance you are standing in front of.
Samsung says to request service if the error continues. Book a visit with us.
Samsung codes, symptoms, parts, house calls
3C is Samsung's pump operation error on a dishwasher: the pump has failed. Turn the dishwasher off and try the cycle again. Book a technician with us if the error still occurs.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Samsung names the dishwasher control panel in two error entries. CE is a communication error: the panel cannot communicate with the rest of the dishwasher. bE and 6E are a button error: the panel detects a stuck button. Turn it off and restart, or touch every button.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.