What it means
Ur is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.
Samsung washer Ur / Load balance
Ur is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.
Also shown as Ur
Ur is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.
Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.
Ur returns even with a small, evenly distributed load.
Your Samsung checks, remembered on this device

Compare the display with Ur one character at a time: Samsung writes it with a capital U and a lowercase r.

Untangle sheets and towels and spread heavy items evenly around the tub.

Close the door and press Start again.

A single heavy item, such as a bath mat, is hard to balance; wash it with a few smaller items.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Samsung says the load is unbalanced inside the tub. Apart from Ur, these codes mean the cycle will fail to complete.
Read the supporting manualUntangle and rearrange the laundry so it sits evenly in the tub, close the door and press Start.
Read the supporting manualAn unbalanced spin can make the washer walk across the floor. Stop the cycle and rebalance before the drum spins fast again.
Read the supporting manualRead Ur as a capital U and a lowercase r. No other Samsung washer row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for Ur is printed as: "dc*, Ub, U6, Ur, UE, 1 Ub, 1U6: Unbalanced Load Error" (TSG10000997, web article).
Samsung says the load is unbalanced inside the tub. Apart from Ur, these codes mean the cycle will fail to complete.
Samsung says Ur means Unbalanced Load Retry: the washer adds water, tries to balance the load and retries the spin, which lengthens the cycle. It is not a washer problem.
Samsung refers to its guide for a washer that will not spin. It is a sign to look at the drain and the spin function, not just the load.
Read it as a capital U and a lowercase r. Samsung's washer list has no other row with these characters.
If you get the error repeatedly after rearranging loads, book a visit with us.
Samsung codes, symptoms, parts, house calls
UE is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.