Samsung washer U6 / Load balance

Samsung washer
error U6

Washer / display referenceU6

U6 is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.

Also shown as U6

Last reviewed

Washer / display referenceU6
Meaning
U6 is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer U6 means.

What it means

U6 is Samsung's unbalanced-load code on a washer: the load is unbalanced in the tub. Rearrange the laundry, close the door and restart. Ur is the exception: it only announces a retry. Book a technician with us if it keeps happening.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

U6 returns even with a small, evenly distributed load.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer U6: Front-load washer with the door open and damp towels bunched in a heavy clump on one side of the stainless drum
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with U6 one character at a time: Samsung writes it with a capital U and the digit 6.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Rebalance the load

    Untangle sheets and towels and spread heavy items evenly around the tub.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Close and restart

    Close the door and press Start again.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Avoid single bulky items

    A single heavy item, such as a bath mat, is hard to balance; wash it with a few smaller items.

Still showing U6?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 3Drive
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung washer reporting with U6?

For U6, Samsung says the load is unbalanced inside the tub. Apart from Ur, these codes mean the cycle will fail to complete.

Read the supporting manual

What should I check before I book a visit?

Untangle and rearrange the laundry so it sits evenly in the tub, close the door and press Start.

Read the supporting manual

Can the washer stay in use while this shows?

An unbalanced spin can make the washer walk across the floor. Stop the cycle and rebalance before the drum spins fast again.

Read the supporting manual

How is U6 different from the codes near it?

Ub differs from U6 only by a look-alike character, 6 against b. Samsung lists both under Unbalanced Load Error, so they carry the same meaning.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for U6 is printed as: "dc*, Ub, U6, Ur, UE, 1 Ub, 1U6: Unbalanced Load Error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with U6?

Samsung says the load is unbalanced inside the tub. Apart from Ur, these codes mean the cycle will fail to complete.

What does Ur mean?

Samsung says Ur means Unbalanced Load Retry: the washer adds water, tries to balance the load and retries the spin, which lengthens the cycle. It is not a washer problem.

What if it keeps happening with a balanced load?

Samsung refers to its guide for a washer that will not spin. It is a sign to look at the drain and the spin function, not just the load.

Is U6 the same as Ub?

Ub differs from U6 only by a look-alike character, 6 against b. Samsung lists both under Unbalanced Load Error, so they carry the same meaning.

Do I need a visit for U6?

If you get the error repeatedly after rearranging loads, book a visit with us.

Which other strings does Samsung print with it?

Samsung's line for Unbalanced Load Error prints 7 strings in this order: dc, Ub, U6, Ur, UE, 1 Ub, 1U6. U6 is number 3 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.