Samsung washer PE1 / Motor and drive

Samsung washer
error PE1

Washer / display referencePE1

PE1 appears on Samsung's list of other washer errors as a Clutch Hall Signal Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

Also shown as PE1

Last reviewed

Washer / display referencePE1
Meaning
PE1 appears on Samsung's list of other washer errors as a Clutch Hall Signal Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
Who handles it
Reset, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer PE1 means.

What it means

PE1 appears on Samsung's list of other washer errors as a Clutch Hall Signal Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

PE1 returns after the power-off and restart.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer PE1: Rear of a front-load washer with the back panel off, showing the drive motor, belt and large spoked pulley, with the power cord unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with PE1 one character at a time: Samsung writes it with a capital P, a capital E and the digit 1.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Power off for 2 to 3 minutes

    Turn the washer off and leave it for 2 to 3 minutes.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Power on and restart

    Turn it back on and restart the cycle.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note when it appears

    Write down whether it appeared at the start of a wash or of a spin.

Still showing PE1?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 3Drive
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung washer reporting with PE1?

Samsung lists it in "All other errors" as a Clutch Hall Signal Error, and gives no specific steps for it, only the basic power-cycle steps.

Read the supporting manual

What should I check before I book a visit?

Power the washer off for 2 to 3 minutes, power it back on and restart the cycle. If the code comes back, note what the washer was doing when it appeared.

Read the supporting manual

Can the washer stay in use while this shows?

Treat a repeating clutch hall signal error as a service matter. Unplug the washer before you open any panel, and do not bypass any part.

Read the supporting manual

How is PE1 different from the codes near it?

8E1 (Mems Sensor Error) differs from PE1 by a single character, and Samsung lists it as a separate entry for this washer. 9E1 (Voltage error) differs from PE1 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for PE1 is printed as: "PC1, PE1 - Clutch Hall Signal Error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with PE1?

Samsung lists it in "All other errors" as a Clutch Hall Signal Error, and gives no specific steps for it, only the basic power-cycle steps.

Does Samsung give specific steps for this code?

No. It is in the "All other errors" part of the list, where the basic power-off, power-on and restart steps apply.

Can PE1 be misread on the display?

On a small display the 1 in PE1 can be taken for I or l. Samsung's washer list has no row spelled that way, so PE1 is the reading to look up.

Do I need a visit for PE1?

Samsung says to request service if the error continues after the basic steps. Book a visit with us at that point.

Let’s take care of it.

Smart appliances still
need a steady hand.