Samsung washer Hot & Small, or Hot & Low / Blinking lights

Samsung washer
error Hot & Small, or Hot & Low

Washer / display referenceHot & Small, or Hot & Low

On a Samsung washer, blinking Hot & Small, or Hot & Low lights are read as: the cold supply is extremely hot because the hoses are swapped. Reconnect the supply hoses to the matching inlets. Book a technician with us if the same lights return and the washer stops working normally.

Also shown as Hot & Small, or Hot & Low

Last reviewed

Washer / display referenceHot & Small, or Hot & Low
Meaning
On a Samsung washer, blinking Hot & Small, or Hot & Low lights are read as: the cold supply is extremely hot because the hoses are swapped. Reconnect the supply hoses to the matching inlets. Book a technician with us if the same lights return and the washer stops working normally.
Who handles it
Check, then book
Source
Samsung washing machine information and error codes

What Samsung washer Hot & Small, or Hot & Low means.

What it means

On a Samsung washer, blinking Hot & Small, or Hot & Low lights are read as: the cold supply is extremely hot because the hoses are swapped. Reconnect the supply hoses to the matching inlets. Book a technician with us if the same lights return and the washer stops working normally.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

The same lights blink again and the washer still does not run normally.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer Hot & Small, or Hot & Low: Front-load washer control panel with a row of small indicator lights, some glowing blue or white, and a round knob, above a glass door showing laundry.
    Illustration. Follow your model’s instructions.
    Before you begin

    Match the lights

    Confirm that exactly Hot & Small, or Hot & Low blink, not more and not fewer. Blinking can also be part of normal operation, so treat it as a code only if the washer is not working normally.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match the hoses

    Cold to the cold inlet, hot to the hot inlet, typically blue to blue and red to red.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Open the taps

    Open both taps fully.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Run a cycle

    Confirm the lights no longer blink.

Still showing Hot & Small, or Hot & Low?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What do blinking Hot & Small, or Hot & Low lights mean on a Samsung washer?

Samsung reads blinking Hot & Small, or Hot & Low lights as: the cold supply is extremely hot because the hoses are swapped.

Read the supporting manual

Are blinking lights always an error code?

No. Samsung says lights may blink as part of regular use, so it is an error only if the washer also is not working normally, for example stopping mid-cycle.

Read the supporting manual

How is this pattern different from the ones near it?

No other pattern in Samsung's washer list differs from Hot & Small, or Hot & Low by a single light, so nothing close to it carries a different reading.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
How does Samsung read blinking Hot & Small, or Hot & Low lights on a Samsung washer?

Samsung reads them as: the cold supply is extremely hot because the hoses are swapped.

Are blinking lights always an error code?

No. Samsung says it is a code only if the washer is also not working normally, such as stopping mid-cycle.

What should I do first when Hot & Small, or Hot & Low blink?

Reconnect the supply hoses to the matching inlets.

Do I need a visit for this pattern?

Samsung says this pattern does not need service. Book a visit with us only if the hoses are right and the lights return.

Which similar patterns carry another reading?

No other pattern in Samsung's washer list differs from Hot & Small, or Hot & Low by a single light, so nothing close to it carries a different reading.

Let’s take care of it.

Smart appliances still
need a steady hand.