Samsung washer dC3 / Door and lid

Samsung washer
error dC3

Washer / display referencedC3

dC3 is Samsung's Add Door error on a washer: the Add Door is not detected as closed and locked. Check its latch and for items caught in it. Book a technician with us if it cannot be corrected or the door or latch is damaged.

Also shown as dC3

Last reviewed

Washer / display referencedC3
Meaning
dC3 is Samsung's Add Door error on a washer: the Add Door is not detected as closed and locked. Check its latch and for items caught in it. Book a technician with us if it cannot be corrected or the door or latch is damaged.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer dC3 means.

What it means

dC3 is Samsung's Add Door error on a washer: the Add Door is not detected as closed and locked. Check its latch and for items caught in it. Book a technician with us if it cannot be corrected or the door or latch is damaged.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

DC3 stays on after the Add Door is clear and shut.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer dC3: Open front-load washer door showing the gray rubber door gasket and drum, the metal latch on the cabinet side, and a detergent drawer pulled out above.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with dC3 one character at a time: Samsung writes it with a lowercase d, a capital C and the digit 3.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check for caught items

    Look for fabric trapped at the edge of the Add Door.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the latch

    The latch should be securely fixed with no damage.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Close it firmly

    Close the Add Door until it locks and restart the cycle.

Still showing dC3?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The door and its lock.

Conceptual Washer sectionDoor / lidDoor lockControl123
  1. 1Door / lid
  2. 3Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Small side hatch on the front of a large white washer swung open, with a blue towel corner hanging out of the opening

Component reference

Washer Add Door

Samsung gives the Add Door its own error, ddC or dC3: the Add Door is not detected as closed and locked.

Read the definition

A little more context.

What is a Samsung washer reporting with dC3?

Samsung says the Add Door, the small door for adding clothes mid-cycle, is not detected as closed and locked.

Read the supporting manual

What should I check before I book a visit?

Check the Add Door latch is fixed, nothing is caught in the door and it is closed and secured.

Read the supporting manual

Can the washer stay in use while this shows?

Do not force the Add Door while water is in the tub. Unplug the washer if it will not release.

Read the supporting manual

How is dC3 different from the codes near it?

AC3 (Communication Error) differs from dC3 by a single character, and Samsung lists it as a separate entry for this washer. dC1 (Door error) differs from dC3 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for dC3 is printed as: "ddC, dC3: Add Door error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with dC3?

Samsung says the Add Door, the small door for adding clothes mid-cycle, is not detected as closed and locked.

Is the Add Door the same as the main door?

No. Samsung lists the Add Door separately from the main door error, with its own strings.

How should I read dC3 on the display?

Read it as a lowercase d, a capital C and the digit 3. Samsung's washer list has no other row with these characters.

Do I need a visit for dC3?

Book a visit with us if the Add Door will not close and lock, or if the door or its latch is damaged.

Let’s take care of it.

Smart appliances still
need a steady hand.