Samsung washer 9C7 / Control board

Samsung washer
error 9C7

Washer / display reference9C7

9C7 appears on Samsung's list of other washer errors as a Hardware Overcurrent Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

Also shown as 9C7

Last reviewed

Washer / display reference9C7
Meaning
9C7 appears on Samsung's list of other washer errors as a Hardware Overcurrent Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
Who handles it
Reset, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 9C7 means.

What it means

9C7 appears on Samsung's list of other washer errors as a Hardware Overcurrent Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

9C7 returns after the power-off and restart.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 9C7: Front-load washer with its top panel set on the counter, exposing the control board in a white housing with wire harnesses; the cord lies unplugged.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 9C7 one character at a time: Samsung writes it with the digit 9, a capital C and the digit 7.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Power off for 2 to 3 minutes

    Turn the washer off and leave it for 2 to 3 minutes.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Power on and restart

    Turn it back on and restart the cycle.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note when it appears

    Write down the cycle and the point in it, such as filling, washing or spinning.

Still showing 9C7?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung washer reporting with 9C7?

For 9C7, Samsung lists it in "All other errors" as a Hardware Overcurrent Error, and gives no specific steps for it, only the basic power-cycle steps.

Read the supporting manual

What should I check before I book a visit?

With 9C7 showing, power the washer off for 2 to 3 minutes, power it back on and restart the cycle. If the code comes back, note what the washer was doing when it appeared.

Read the supporting manual

Can the washer stay in use while this shows?

Safety with 9C7: Treat a repeating hardware overcurrent error as a service matter. Unplug the washer before you open any panel, and do not bypass any part.

Read the supporting manual

How is 9C7 different from the codes near it?

9C1 (Voltage error) differs from 9C7 by a single character, and Samsung lists it as a separate entry for this washer. 9C2 (Voltage error) differs from 9C7 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 9C7 is printed as: "9C7 - Hardware Overcurrent Error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 9C7?

Samsung lists it in "All other errors" as a Hardware Overcurrent Error, and gives no specific steps for it, only the basic power-cycle steps.

Does Samsung give specific steps for this code?

No. It is in the "All other errors" part of the list, where the basic power-off, power-on and restart steps apply.

How should I read 9C7 on the display?

Read it as the digit 9, a capital C and the digit 7. Samsung's washer list has no other row with these characters.

Do I need a visit for 9C7?

Samsung says to request service if the error continues after the basic steps. Book a visit with us at that point.

Let’s take care of it.

Smart appliances still
need a steady hand.