What it means
dn on a Samsung dryer means a firmware download is in progress. Do not unplug the dryer or shut off the power. It restarts itself when the software is installed. Book a technician with us only if it still shows after 24 hours.
Samsung dryer dn / Information
dn on a Samsung dryer means a firmware download is in progress. Do not unplug the dryer or shut off the power. It restarts itself when the software is installed. Book a technician with us only if it still shows after 24 hours.
Also shown as dn
dn on a Samsung dryer means a firmware download is in progress. Do not unplug the dryer or shut off the power. It restarts itself when the software is installed. Book a technician with us only if it still shows after 24 hours.
Pull the plug before you work near the vent run or a panel.
Dn remains lit after 24 hours.
Your Samsung checks, remembered on this device

Compare the display with dn one character at a time: Samsung writes it with a lowercase d and a lowercase n.

Do not unplug the dryer or switch off the breaker.

The download time varies with file size and connection speed.

Samsung's threshold for service is 24 hours of dn.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Samsung says a download to the dryer's firmware is in progress. The time varies with file size and connection speed, and the dryer restarts itself when it is done.
Read the supporting manualLeave the dryer plugged in and powered. Check your Wi-Fi if it seems stuck.
Read the supporting manualUnplugging mid-download can leave the dryer inoperable and in need of service, so leave it alone.
Read the supporting manualThe same characters also appear on a washer, where Samsung ties it to Downloading. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for dn is printed as: "Download in progress (dn)" (TSG10001006, web article).
Samsung says a download to the dryer's firmware is in progress. The time varies with file size and connection speed, and the dryer restarts itself when it is done.
Samsung says to request service if the dryer is still showing dn after 24 hours.
The same characters also appear on a washer, where Samsung ties it to Downloading. Check which appliance you are standing in front of.
Book a visit with us if it still shows after 24 hours.
Samsung codes, symptoms, parts, house calls
bE is a jammed-button error on a Samsung dryer: a panel button is detected as stuck. Power off and touch and release every button, working each back and forth. Book a technician with us if a button is damaged or the code returns.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.