What it means
d0 is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.
Samsung dryer d0 / Door and lid
d0 is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.
Also shown as d0
d0 is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.
Pull the plug before you work near the vent run or a panel.
D0 stays on after the door latches cleanly.
Your Samsung checks, remembered on this device

Compare the display with d0 one character at a time: Samsung writes it with a lowercase d and the digit 0.

A sleeve or strap caught between the door and the drum seal is a common reason a door will not seat.

The latch should be securely fixed and show no damage.

Close the door firmly, then restart the cycle.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
Samsung groups dC, dE, dF, do, d0, 1 DC and 1 dF as door-related errors: the door, its latch, and the sensors that detect them.
Read the definitionFor d0, Samsung says these relate to the door, its latch and the sensors that detect whether they are secured. They can occur when the door will not stay closed, or will not close or latch.
Read the supporting manualWith d0 showing, check the latch is securely fixed, laundry is not caught in the door, and the door is closed and secured correctly.
Read the supporting manualSafety with d0: Do not run the dryer with a door that does not latch. Unplug it before looking at the latch, and keep hands out of the drum.
Read the supporting manualdo differs from d0 only by a look-alike character, 0 against o. Samsung lists both under Door-Related errors, so they carry the same meaning. The same characters also appear on an induction cooktop, where Samsung ties it to key pressed. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for d0 is printed as: "Door-Related errors (dC, dE, dF, do, d0, 1 DC, 1 dF)" (TSG10001006, web article).
Samsung says these relate to the door, its latch and the sensors that detect whether they are secured. They can occur when the door will not stay closed, or will not close or latch.
Samsung says it covers the door, its latch and the sensors that detect whether they are secured.
Yes. Samsung ties the group to the door, its latch and the sensors that detect them, so a door that looks shut but is not latched or sensed as secured can still raise it. Open it fully and close it firmly.
Better not to. A dryer that cannot confirm the door is secured should not run, and a damaged latch is a reason to book a visit instead of forcing the door.
do differs from d0 only by a look-alike character, 0 against o. Samsung lists both under Door-Related errors, so they carry the same meaning.
Samsung says to request service if the code cannot be corrected or there is damage to the door or latch. Book a visit with us at that point.
Samsung's line for Door-Related errors prints 7 strings in this order: dC, dE, dF, do, d0, 1 DC, 1 dF. d0 is number 5 of them.
Samsung codes, symptoms, parts, house calls
dC is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Samsung groups dC, dE, dF, do, d0, 1 DC and 1 dF as door-related errors: the door, its latch, and the sensors that detect them. Check the latch is fixed and nothing is caught. Damage to the door or latch needs a visit.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.