Samsung dryer dC / Door and lid

Samsung dryer
error dC

Dryer / display referencedC

dC is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.

Also shown as dC

Last reviewed

Dryer / display referencedC
Meaning
dC is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.
Who handles it
Check, then book
Related codes
Source
Samsung dryer displays an error code

What Samsung dryer dC means.

What it means

dC is a door-related error on a Samsung dryer: the door, its latch or the sensors that detect them. Check the latch is fixed, nothing is caught in the door and it closes and secures. Book a technician with us if it cannot be corrected.

What you can safely check

Pull the plug before you work near the vent run or a panel.

When to call a technician

DC stays on after the door latches cleanly.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dryer dC: Close view of an open front-load dryer door showing the metal latch hook on the door and the matching slot with two screws on the cabinet front.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with dC one character at a time: Samsung writes it with a lowercase d and a capital C.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check for caught laundry

    A sleeve or strap caught between the door and the drum seal is a common reason a door will not seat.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the latch

    The latch should be securely fixed and show no damage.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Close and restart

    Close the door firmly, then restart the cycle.

Still showing dC?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 2Thermostat / fuse
  2. 3Drum
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Open dryer door with the metal latch plate on the front frame and a gray sock resting on the drum opening in a bright laundry room

Component reference

Dryer door latch

Samsung groups dC, dE, dF, do, d0, 1 DC and 1 dF as door-related errors: the door, its latch, and the sensors that detect them.

Read the definition

A little more context.

What is a Samsung dryer reporting with dC?

For dC, Samsung says these relate to the door, its latch and the sensors that detect whether they are secured. They can occur when the door will not stay closed, or will not close or latch.

Read the supporting manual

What should I check before I book a visit?

Check the latch is securely fixed, laundry is not caught in the door, and the door is closed and secured correctly.

Read the supporting manual

Can the dryer stay in use while this shows?

Do not run the dryer with a door that does not latch. Unplug it before looking at the latch, and keep hands out of the drum.

Read the supporting manual

How is dC different from the codes near it?

The same characters also appear on a washer, where Samsung ties it to Door error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dryer displays an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-04; no printed revision / article

Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for dC is printed as: "Door-Related errors (dC, dE, dF, do, d0, 1 DC, 1 dF)" (TSG10001006, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dryer reporting with dC?

Samsung says these relate to the door, its latch and the sensors that detect whether they are secured. They can occur when the door will not stay closed, or will not close or latch.

What does this group cover?

Samsung says it covers the door, its latch and the sensors that detect whether they are secured.

Can a door code appear when the door looks shut?

Yes. Samsung ties the group to the door, its latch and the sensors that detect them, so a door that looks shut but is not latched or sensed as secured can still raise it. Open it fully and close it firmly.

Is it safe to keep drying with a door code?

Better not to. A dryer that cannot confirm the door is secured should not run, and a damaged latch is a reason to book a visit instead of forcing the door.

Does dC mean the same on a washer?

The same characters also appear on a washer, where Samsung ties it to Door error. Check which appliance you are standing in front of.

Do I need a visit for dC?

Samsung says to request service if the code cannot be corrected or there is damage to the door or latch. Book a visit with us at that point.

Which other strings does Samsung print with it?

Samsung's line for Door-Related errors prints 7 strings in this order: dC, dE, dF, do, d0, 1 DC, 1 dF. dC is number 1 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.