Cl9 is printed in the heading of Samsung's Vent Blockage test results, between Clg and Cg. The result means the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if it returns.
Cl9 is printed in the heading of Samsung's Vent Blockage test results, between Clg and Cg. The result means the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if it returns.
Cl9 is printed in the heading of Samsung's Vent Blockage test results, between Clg and Cg. The result means the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if it returns.
What you can safely check
Pull the plug before you work near the vent run or a panel.
When to call a technician
The display keeps showing Cl9 after you clean the lint filter and vent.
Your Samsung checks, remembered on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Read the display
Compare the display with Cl9 one character at a time: Samsung writes it with a capital C, a lowercase l and the digit 9.
Illustration. Follow your model’s instructions.
Check 2
Clean the lint filter
Pull the lint filter and remove all lint from it and from the slot it sits in.
Illustration. Follow your model’s instructions.
Check 3
Clean the exhaust vent
Disconnect the duct from the back of the dryer and clear it to the outside wall. Unplug the dryer first.
Illustration. Follow your model’s instructions.
Check 4
Run the test again
Repeat the Vent Blockage test once the vent is clean to see a better result.
Still showing Cl9?
Tell us your model and the checks you have already run, then open your request from this spot.
Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors.
For Cl9, Samsung says these codes appear only after a Vent Blockage test. Clg and Cg mean the vent is clogged, C80 and C8 about 80 percent clogged, and C90 and C9 over 90 percent.
With Cl9 showing, clean the lint filter and the exhaust vent, then run the test again. If laundry is in the drum or the dryer is very cold or hot, fix that first.
Safety with Cl9: A clogged vent traps heat and lint, which is a fire risk. Do not run the dryer until the vent is clear, and unplug it before you disconnect the duct.
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Manufacturer document
Clothes are not dry after using Samsung dryer
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-05; no printed revision / article
Manufacturer document
Run a Vent Blockage test on your Samsung dryer
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code; Clothes are not dry after using Samsung dryer (Samsung US support article TSG10001001, TSG10001006), checked November 2026. The entry used for Cl9 is printed as: "Vent Blockage test results (Clg, Cl9, Cg, C9, C80, C8o, C8, C90, C9o, Ct)" (TSG10001006, web article).
Samsung says these codes appear only after a Vent Blockage test. Clg and Cg mean the vent is clogged, C80 and C8 about 80 percent clogged, and C90 and C9 over 90 percent.
When does this kind of code appear?
Samsung says these codes only appear after a Vent Blockage test has been run. They are test readings, not failures found during a normal cycle.
What does Ct mean?
Samsung says Ct means the dryer is below freezing or above 104 degrees F. Wait one hour with the dryer at room temperature and try again.
Can Cl9 be misread on the display?
On a small display the l in Cl9 can be taken for 1. Samsung's dryer list has no row spelled that way, so Cl9 is the reading to look up.
Is Cl9 the same as CL9 in the test article?
Samsung's error-list heading prints Cl9 with a lowercase l and the test article prints CL9 with a capital L. Neither source gives them separate meanings, only the shared one: the duct system cannot exhaust properly.
Which other strings does Samsung print with it?
Samsung's line for Vent Blockage test results prints 10 strings, and Cl9 is number 2, right after Clg and right before Cg.