What it means
tE is Samsung's temperature sensor error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. Book a technician with us if it returns.
Samsung dishwasher tE / Sensors
tE is Samsung's temperature sensor error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. Book a technician with us if it returns.
Also shown as tE
tE is Samsung's temperature sensor error on a dishwasher: the temperature inside is detected incorrectly. Empty it, add detergent and run a normal cycle. Book a technician with us if it returns.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
TE returns after the normal cycle.
Your Samsung checks, remembered on this device

Compare the display with tE one character at a time: Samsung writes it with a lowercase t and a capital E.

Remove the dishes.

Put detergent in the dispenser.

Start a Normal cycle and see whether the code returns.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Samsung says the temperature inside is detected incorrectly.
Read the supporting manualEmpty the dishwasher, add detergent and run a normal cycle.
Read the supporting manualLet the tub cool before you reach in, and cut power at the breaker if the code returns.
Read the supporting manualThe same characters also appear on a dryer, where Samsung ties it to Temperature errors; and on a washer, where Samsung ties it to Temperature Sensor Error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for tE is printed as: "tE - Temperature sensor error" (TSG10004499, web article).
Samsung says the temperature inside is detected incorrectly.
The wording is close; Samsung lists the two separately.
The same characters also appear on a dryer, where Samsung ties it to Temperature errors; and on a washer, where Samsung ties it to Temperature Sensor Error. Check which appliance you are standing in front of.
If the code returns, book a visit with us.
Samsung codes, symptoms, parts, house calls
3C is Samsung's pump operation error on a dishwasher: the pump has failed. Turn the dishwasher off and try the cycle again. Book a technician with us if the error still occurs.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.