What it means
3E is Samsung's high temperature water supply error on a dishwasher: the incoming water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if it still occurs.
Samsung dishwasher 3E / Heating
3E is Samsung's high temperature water supply error on a dishwasher: the incoming water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if it still occurs.
Also shown as 3E
3E is Samsung's high temperature water supply error on a dishwasher: the incoming water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if it still occurs.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
3E stays on with the hot water supply at or below 176 F.
Your Samsung checks, remembered on this device

Compare the display with 3E one character at a time: Samsung writes it with the digit 3 and a capital E.

Find the temperature setting on your water heater and compare it with 176 degrees F.

Lower the setting if it is above that, as your heater's manual describes.

Start a cycle and see whether the code returns.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For 3E, Samsung says the water coming in is too hot, and tells you to verify the hot water supply is not set above 176 degrees F.
Read the supporting manualWith 3E showing, check your water heater setting; it should not be above 176 degrees F. If it is, lower it and run the dishwasher again.
Read the supporting manualSafety with 3E: Hot water is a scald risk. Lower the heater setting only as its label describes, and let water cool before you touch fittings.
Read the supporting manualThe same characters also appear on a washer, where Samsung ties it to Voltage error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for 3E is printed as: "3E - High temperature water supply error" (TSG10004499, web article).
Samsung says the water coming in is too hot, and tells you to verify the hot water supply is not set above 176 degrees F.
Samsung's page only says the water is too hot and gives a ceiling of 176 degrees F for the supply.
The same characters also appear on a washer, where Samsung ties it to Voltage error. Check which appliance you are standing in front of.
If the supply is not above 176 degrees F and the error still occurs, Samsung says to request service. Book a visit with us.
Samsung codes, symptoms, parts, house calls
3C is Samsung's pump operation error on a dishwasher: the pump has failed. Turn the dishwasher off and try the cycle again. Book a technician with us if the error still occurs.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.