Samsung dishwasher Normal, Quick+, and Smart Auto / Blinking lights

Samsung dishwasher
error Normal, Quick+, and Smart Auto

Dishwasher / display referenceNormal, Quick+, and Smart Auto

On a Samsung dishwasher, blinking Normal, Quick+, and Smart Auto lights are read as: the water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if the same lights return and the dishwasher stops working normally.

Also shown as Normal, Quick+, and Smart Auto

Last reviewed

Dishwasher / display referenceNormal, Quick+, and Smart Auto
Meaning
On a Samsung dishwasher, blinking Normal, Quick+, and Smart Auto lights are read as: the water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if the same lights return and the dishwasher stops working normally.
Who handles it
Check, then book
Source
Lights are blinking on the Samsung dishwasher

What Samsung dishwasher Normal, Quick+, and Smart Auto means.

What it means

On a Samsung dishwasher, blinking Normal, Quick+, and Smart Auto lights are read as: the water is too hot. Verify the hot water supply is not set above 176 degrees F. Book a technician with us if the same lights return and the dishwasher stops working normally.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

The same lights blink again and the dishwasher stops working normally.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher Normal, Quick+, and Smart Auto: Top control strip of a slightly open dishwasher with small lit indicator dots and dashes, a damp gray towel hanging on the handle and dishes in the rack.
    Illustration. Follow your model’s instructions.
    Before you begin

    Match the lights

    Confirm that exactly Normal, Quick+, and Smart Auto blink, not more and not fewer (3 lights). Blinking can also be part of normal operation, so treat it as a code only if the dishwasher is not working normally.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the water heater

    Find its temperature setting.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Compare with 176 F

    Samsung says the hot supply should not be set above 176 degrees F.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retry

    Run the dishwasher again.

Still showing Normal, Quick+, and Smart Auto?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What do blinking Normal, Quick+, and Smart Auto lights mean on a Samsung dishwasher?

Samsung reads blinking Normal, Quick+, and Smart Auto lights as: the water is too hot.

Read the supporting manual

Are blinking lights always an error code?

No. Samsung says lights may blink as part of regular use, so it is an error only if the dishwasher also is not working normally, for example stopping mid-cycle.

Read the supporting manual

How is this pattern different from the ones near it?

Normal and Quick+ differs from this pattern by one light; Samsung reads it as: the panel detects a stuck button. Normal and Smart Auto differs from this pattern by one light; Samsung reads it as: the dishwasher is too hot.

Read the supporting manual

The manual behind the message.

Manufacturer document

Lights are blinking on the Samsung dishwasher

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-04-08; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Lights are blinking on the Samsung dishwasher (Samsung US support article TSG10002410), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
How does Samsung read blinking Normal, Quick+, and Smart Auto lights on a Samsung dishwasher?

Samsung reads them as: the water is too hot.

Are blinking lights always an error code?

No. Samsung says it is a code only if the dishwasher is also not working normally, such as stopping mid-cycle.

What should I do first when Normal, Quick+, and Smart Auto blink?

Verify the hot water supply is not set above 176 degrees F.

Do I need a visit for this pattern?

If the supply is not set above 176 degrees F and the lights return, Samsung says to request service. Book a visit with us.

Which lights are part of the Normal, Quick+, and Smart Auto pattern?

Normal, Quick+, and Smart Auto names 3 lights: Normal, Quick+, Smart Auto. Samsung lists it as its own pattern, separate from every other combination of these lights.

Which similar patterns carry another reading?

Normal and Quick+ differs from this pattern by one light; Samsung reads it as: the panel detects a stuck button. Normal and Smart Auto differs from this pattern by one light; Samsung reads it as: the dishwasher is too hot.

Does Samsung print this reading for other patterns?

Samsung prints the same reading for 1 other pattern: Normal, Delicate, and Smart Auto. Match your lights exactly to this page's pattern.

Let’s take care of it.

Smart appliances still
need a steady hand.