Samsung dishwasher Normal and Heavy / Blinking lights

Samsung dishwasher
error Normal and Heavy

Dishwasher / display referenceNormal and Heavy

On a Samsung dishwasher, blinking Normal and Heavy lights are read as: the thermistor is not operating correctly. Samsung's page gives no home steps for this pattern, only service. Book a technician with us if the same lights return and the dishwasher stops working normally.

Also shown as Normal and Heavy

Last reviewed

Dishwasher / display referenceNormal and Heavy
Meaning
On a Samsung dishwasher, blinking Normal and Heavy lights are read as: the thermistor is not operating correctly. Samsung's page gives no home steps for this pattern, only service. Book a technician with us if the same lights return and the dishwasher stops working normally.
Who handles it
Check, then book
Source
Lights are blinking on the Samsung dishwasher

What Samsung dishwasher Normal and Heavy means.

What it means

On a Samsung dishwasher, blinking Normal and Heavy lights are read as: the thermistor is not operating correctly. Samsung's page gives no home steps for this pattern, only service. Book a technician with us if the same lights return and the dishwasher stops working normally.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

The same lights blink again and the dishwasher stops working normally.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher Normal and Heavy: Top control strip of a slightly open dishwasher with small lit indicator dots and dashes, a damp gray towel hanging on the handle and dishes in the rack.
    Illustration. Follow your model’s instructions.
    Before you begin

    Match the lights

    Confirm that exactly Normal and Heavy blink, not more and not fewer (2 lights). Blinking can also be part of normal operation, so treat it as a code only if the dishwasher is not working normally.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Switch off

    Cut power at the breaker.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Note the lights

    Write down the exact pattern.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    Samsung gives no home steps for this pattern.

Still showing Normal and Heavy?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What do blinking Normal and Heavy lights mean on a Samsung dishwasher?

Samsung reads blinking Normal and Heavy lights as: the thermistor is not operating correctly.

Read the supporting manual

What should I check before I book a visit?

Samsung's page gives no home steps for this pattern, only service.

Read the supporting manual

Are blinking lights always an error code?

No. Samsung says lights may blink as part of regular use, so it is an error only if the dishwasher also is not working normally, for example stopping mid-cycle.

Read the supporting manual

How is this pattern different from the ones near it?

Heavy (models without Express 60) differs from this pattern by one light; Samsung reads it as: the dishwasher's leak sensor detects moisture. Heavy (models with Express 60) differs from this pattern by one light; Samsung reads it as: there is too much water in the dishwasher.

Read the supporting manual

The manual behind the message.

Manufacturer document

Lights are blinking on the Samsung dishwasher

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-04-08; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Lights are blinking on the Samsung dishwasher (Samsung US support article TSG10002410), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
How does Samsung read blinking Normal and Heavy lights on a Samsung dishwasher?

Samsung reads them as: the thermistor is not operating correctly.

Are blinking lights always an error code?

No. Samsung says it is a code only if the dishwasher is also not working normally, such as stopping mid-cycle.

What should I do first when Normal and Heavy blink?

Samsung's page gives no home steps for this pattern, only service.

Do I need a visit for this pattern?

Samsung gives no steps beyond requesting service. Book a visit with us.

Which lights are part of the Normal and Heavy pattern?

Normal and Heavy names 2 lights: Normal, Heavy. Samsung lists it as its own pattern, separate from every other combination of these lights.

Which similar patterns carry another reading?

Heavy (models without Express 60) differs from this pattern by one light; Samsung reads it as: the dishwasher's leak sensor detects moisture. Heavy (models with Express 60) differs from this pattern by one light; Samsung reads it as: there is too much water in the dishwasher.

Let’s take care of it.

Smart appliances still
need a steady hand.