Inside the appliance
Dishwasher Zone Wash. In plain English.
PC is Samsung's Zone Wash error: the Zone Wash function is not operating correctly. Samsung's step is to turn the dishwasher off and start the cycle again. If PC returns, book a technician.

Where it fits.
Dishwasher Zone Wash in the appliance
Samsung's article does not describe where Zone Wash sits; it is a wash function.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher Zone Wash problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Turn it off
Samsung asks you to turn off the dishwasher, then try to start the cycle again.
- 2
Read the display
PC is Zone Wash; PE on the same page is a half load function error, a different entry.
- 3
Record when it shows
Note which cycle you were running and the model number before you call.
Cleaning or replacement?
Leave internal testing to a technician.
PC returns after you turn the dishwasher off and start again.
Zone Wash will not start on a cycle that uses it.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher Zone Wash advice. Choose the manual that fits your model.
- Samsung dishwasher is displaying an error code
Follow the user manual for your exact model. See how we research these pages.
What does PC mean?
Samsung words it as a Zone Wash error: the Zone Wash function is not operating correctly.
What is the home step?
Turn off the dishwasher and try to start the cycle again.
Is PE the same?
No. PE is a half load function error with its own steps.
When do I book?
If PC shows again after the restart. Samsung's page lists no other step.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
PC
PC is Samsung's Zone Wash error on a dishwasher: the Zone Wash function is not operating correctly. Turn the dishwasher off and try the cycle again. Book a technician with us if it persists.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.


