Samsung dishwasher 1E / Water and drain

Samsung dishwasher
error 1E

Dishwasher / display reference

1E on a Samsung dishwasher has two meanings by model. Waterwall models: water is not getting through the fine filter, so clean it. Rotary models: the inside is too hot, so cut power at the breaker for 30 seconds, empty it and run a Normal cycle.

Also shown as 1E

Last reviewed

Dishwasher / display reference
Meaning
1E on a Samsung dishwasher has two meanings by model. Waterwall models: water is not getting through the fine filter, so clean it. Rotary models: the inside is too hot, so cut power at the breaker for 30 seconds, empty it and run a Normal cycle.
Who handles it
Check, then book
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher 1E means.

What it means

1E on a Samsung dishwasher has two meanings by model. Waterwall models: water is not getting through the fine filter, so clean it. Rotary models: the inside is too hot, so cut power at the breaker for 30 seconds, empty it and run a Normal cycle.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

1E returns after the step for your model.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher 1E: A gloved, wet hand lifts the cylindrical mesh filter out of the dishwasher sump, with a little water in the basin below and a spray arm lying aside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 1E one character at a time: Samsung writes it with the digit 1 and a capital E.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Identify your model

    Samsung splits this code between Waterwall models and Rotary models. The model label and manual tell you which you have.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Waterwall: clean the fine filter

    Take out and rinse the fine filter at the bottom of the tub, as your user manual describes.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Rotary: power-cycle and rerun

    Turn the dishwasher off at the circuit breaker for 30 seconds, empty it, fill the detergent drawer and start a Normal cycle.

Still showing 1E?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Wet hand lifting a cylindrical mesh fine filter out of the sump of an empty stainless dishwasher tub beside the spray arm

Component reference

Dishwasher fine filter

On Waterwall models, 1E or IE means water is not making it through the filter.

Read the definition

A little more context.

What is a Samsung dishwasher reporting with 1E?

For 1E: Samsung gives two readings. On Waterwall models water is not making it through the filter. On Rotary models the temperature inside is too hot. Which applies depends on your model.

Read the supporting manual

What should I check before I book a visit?

With 1E showing, waterwall: clean the fine filter at the bottom, following your manual. Rotary: switch the dishwasher off at the breaker for 30 seconds, empty it, fill the detergent drawer and run a Normal cycle.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Safety with 1E: Switch the breaker off before you reach into the base. Let the tub cool before you handle a hot filter or rack.

Read the supporting manual

How is 1E different from the codes near it?

IE differs from 1E only by a look-alike character, 1 against I. Samsung lists both under Clogged filter error (Waterwall models) or High temperature heater error (Rotary models), so they carry the same meaning.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for 1E is printed as: "1E, IE - Clogged filter error (Waterwall models) or High temperature heater error (Rotary models)" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with 1E?

Samsung gives two readings. On Waterwall models water is not making it through the filter. On Rotary models the temperature inside is too hot. Which applies depends on your model.

How do I know if I have a Waterwall or a Rotary model?

Samsung does not tell you in the article. Check the model number on the label and your user manual, which shows the spray system.

Which models are Waterwall?

Samsung's page does not list model numbers. The user manual for your dishwasher says which spray system it has, and that decides which of the two readings applies.

What is the fine filter?

The filter at the bottom of the tub that catches food particles. Samsung says to clean it as your user manual describes.

Is 1E the same as IE?

IE differs from 1E only by a look-alike character, 1 against I. Samsung lists both under Clogged filter error (Waterwall models) or High temperature heater error (Rotary models), so they carry the same meaning.

Do I need a visit for 1E?

Samsung says to request service if the code returns after the filter is cleaned (Waterwall) or if the error occurs again after the Normal cycle (Rotary). Book a visit with us at that point.

Let’s take care of it.

Smart appliances still
need a steady hand.