What it means
19C2 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.
Samsung washer 19C2 / Power supply
19C2 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.
Also shown as 19C2
19C2 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.
Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.
19C2 returns while the circuit and plug are in order.
Your Samsung checks, remembered on this device

Compare the display with 19C2 one character at a time: Samsung writes it with the digit 1, the digit 9, a capital C and the digit 2.

The washer should be on its own circuit. Check whether the breaker has tripped.

Plug the washer directly into the wall outlet; extension cords and power strips are not recommended.

Think about whether the power went out, the plug was pulled, or the breaker tripped before the code appeared.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For 19C2, Samsung says there is an irregularity in the electrical current supplied to the washer. PF also appears after an outage, an unplug or a tripped breaker.
Read the supporting manualWith 19C2 showing, plug the washer straight into its own wall outlet circuit, with no extension cord or shared power strip, then try again.
Read the supporting manualSafety with 19C2: Do not open the cabinet or touch the outlet wiring yourself. If the outlet is hot, scorched or loose, stop using it and call an electrician.
Read the supporting manual14C2 (Hot/cold error) differs from 19C2 by a single character, and Samsung lists it as a separate entry for this washer. 18C2 (Mems Sensor Error) differs from 19C2 by a single character, and Samsung lists it as a separate entry for this washer.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 19C2 is printed as: "9C1, 9C2, PF, 3E*, 2E, 9E1, 9E2, UC, 19C1, 19C2: Voltage error" (TSG10000997, web article).
Samsung says there is an irregularity in the electrical current supplied to the washer. PF also appears after an outage, an unplug or a tripped breaker.
Samsung says models used outside their country of origin may display it because power grids and regulations vary between countries.
Samsung puts PF in the same voltage group. PF specifically also follows an outage, an unplug or a tripped breaker.
19C2 is 9C2 with a leading 1. Samsung lists the two together under Voltage error and does not say what the 1 changes, so read them as one meaning.
If the washer is on its own circuit with no extension cord and the code continues, book a visit with us.
Samsung's line for Voltage error prints 10 strings, and 19C2 is number 10, right after 19C1.
Samsung codes, symptoms, parts, house calls
PF is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.