Samsung washer 19C1 / Power supply

Samsung washer
error 19C1

Washer / display reference19C1

19C1 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.

Also shown as 19C1

Last reviewed

Washer / display reference19C1
Meaning
19C1 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 19C1 means.

What it means

19C1 is Samsung's voltage error on a washer: an irregularity in the electrical supply. Confirm the washer is on its own circuit and not on an extension cord. Book a technician with us if the code continues.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

19C1 returns while the circuit and plug are in order.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 19C1: Washer power cord with a three-prong plug in a wall outlet beside a four-outlet surge strip and a closed gray breaker panel cover
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 19C1 one character at a time: Samsung writes it with the digit 1, the digit 9, a capital C and the digit 1.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the circuit

    The washer should be on its own circuit. Check whether the breaker has tripped.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Remove extension cords

    Plug the washer directly into the wall outlet; extension cords and power strips are not recommended.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note recent events

    Think about whether the power went out, the plug was pulled, or the breaker tripped before the code appeared.

Still showing 19C1?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung washer reporting with 19C1?

For 19C1, Samsung says there is an irregularity in the electrical current supplied to the washer. PF also appears after an outage, an unplug or a tripped breaker.

Read the supporting manual

What should I check before I book a visit?

With 19C1 showing, plug the washer straight into its own wall outlet circuit, with no extension cord or shared power strip, then try again.

Read the supporting manual

Can the washer stay in use while this shows?

Do not open the cabinet or touch the outlet wiring yourself. If the outlet is hot, scorched or loose, stop using it and call an electrician.

Read the supporting manual

How is 19C1 different from the codes near it?

18C1 (Mems Sensor Error) differs from 19C1 by a single character, and Samsung lists it as a separate entry for this washer. 1BC1 (Mems Sensor Error) differs from 19C1 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 19C1 is printed as: "9C1, 9C2, PF, 3E*, 2E, 9E1, 9E2, UC, 19C1, 19C2: Voltage error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 19C1?

Samsung says there is an irregularity in the electrical current supplied to the washer. PF also appears after an outage, an unplug or a tripped breaker.

Why would a washer from another country show this code?

Samsung says models used outside their country of origin may display it because power grids and regulations vary between countries.

Is PF the same as other voltage codes?

Samsung puts PF in the same voltage group. PF specifically also follows an outage, an unplug or a tripped breaker.

Is 19C1 the same as 9C1?

19C1 is 9C1 with a leading 1. Samsung lists the two together under Voltage error and does not say what the 1 changes, so read them as one meaning.

Do I need a visit for 19C1?

If the washer is on its own circuit with no extension cord and the code continues, book a visit with us.

Which other strings does Samsung print with it?

Samsung's line for Voltage error prints 10 strings, and 19C1 is number 9, right after UC and right before 19C2.

Let’s take care of it.

Smart appliances still
need a steady hand.