What it means
EEE is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Samsung dryer EEE / Control board
EEE is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Also shown as EEE
EEE is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Pull the plug before you work near the vent run or a panel.
EEE returns after the 60-second power-off.
Your Samsung checks, remembered on this device

Compare the display with EEE one character at a time: Samsung writes it with a capital E, a capital E and a capital E.

Turn the dryer off, or unplug it, for 60 seconds.

Power on and restart a cycle.

Write down whether it appears at power-on or in a cycle.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For EEE, Samsung says the dryer's internal components cannot communicate with each other.
Read the supporting manualWith EEE showing, shut the dryer off for 60 seconds, then turn it back on.
Read the supporting manualSafety with EEE: Unplug the dryer rather than just powering off at the panel if you will reach behind it. Do not open the control panel.
Read the supporting manualRead EEE as a capital E, a capital E and a capital E. No other Samsung dryer row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for EEE is printed as: "Communication errors (AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC)" (TSG10001006, web article).
Samsung says the dryer's internal components cannot communicate with each other.
No. Samsung's printed step is a 60-second power-off and restart. Service is for a code that remains.
That is Samsung's printed wait before turning the dryer back on. A full minute lets the control power down completely.
Samsung does not say. A brief power glitch is a reasonable thing to note, because a restart after the 60 seconds is the printed fix.
Read it as a capital E, a capital E and a capital E. Samsung's dryer list has no other row with these characters.
Samsung says to request service if the code remains after the 60-second restart. Book a visit with us at that point.
Samsung's line for Communication errors prints 9 strings, and EEE is number 4, right after AE and right before AE4.
Samsung codes, symptoms, parts, house calls
AC is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.