Samsung dryer E3 / Control board

Samsung dryer
error E3

Dryer / display reference

E3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.

Also shown as E3

Last reviewed

Dryer / display reference
Meaning
E3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Who handles it
Check, then book
Related codes
Source
Samsung dryer displays an error code

What Samsung dryer E3 means.

What it means

E3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.

What you can safely check

Pull the plug before you work near the vent run or a panel.

When to call a technician

E3 returns after the 60-second power-off.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dryer E3: Front-load dryer with its top panel tilted up, showing the control board in a white housing with wire harnesses; the unplugged cord lies on the counter.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with E3 one character at a time: Samsung writes it with a capital E and the digit 3.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Shut it off

    Turn the dryer off, or unplug it, for 60 seconds.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Turn it back on

    Power on and restart a cycle.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note when it shows

    Write down whether it appears at power-on or in a cycle.

Still showing E3?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 2Thermostat / fuse
  2. 3Drum
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung dryer reporting with E3?

For E3, Samsung says the dryer's internal components cannot communicate with each other.

Read the supporting manual

What should I check before I book a visit?

With E3 showing, shut the dryer off for 60 seconds, then turn it back on.

Read the supporting manual

Can the dryer stay in use while this shows?

Safety with E3: Unplug the dryer rather than just powering off at the panel if you will reach behind it. Do not open the control panel.

Read the supporting manual

How is E3 different from the codes near it?

The same characters also appear on a washer, where Samsung ties it to Motor Error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dryer displays an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-04; no printed revision / article

Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for E3 is printed as: "Communication errors (AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC)" (TSG10001006, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dryer reporting with E3?

Samsung says the dryer's internal components cannot communicate with each other.

Is the dryer lost if this appears?

No. Samsung's printed step is a 60-second power-off and restart. Service is for a code that remains.

Why 60 seconds?

That is Samsung's printed wait before turning the dryer back on. A full minute lets the control power down completely.

Could a power flicker have caused it?

Samsung does not say. A brief power glitch is a reasonable thing to note, because a restart after the 60 seconds is the printed fix.

Does E3 mean the same on a washer?

The same characters also appear on a washer, where Samsung ties it to Motor Error. Check which appliance you are standing in front of.

Do I need a visit for E3?

Samsung says to request service if the code remains after the 60-second restart. Book a visit with us at that point.

Which other strings does Samsung print with it?

Samsung's line for Communication errors prints 9 strings, and E3 is number 8, right after AE5 and right before 1 AC.

Let’s take care of it.

Smart appliances still
need a steady hand.