What it means
AE3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Samsung dryer AE3 / Control board
AE3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Also shown as AE3
AE3 is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Pull the plug before you work near the vent run or a panel.
AE3 returns after the 60-second power-off.
Your Samsung checks, remembered on this device

Compare the display with AE3 one character at a time: Samsung writes it with a capital A, a capital E and the digit 3.

Turn the dryer off, or unplug it, for 60 seconds.

Power on and restart a cycle.

Write down whether it appears at power-on or in a cycle.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For AE3, Samsung says the dryer's internal components cannot communicate with each other.
Read the supporting manualWith AE3 showing, shut the dryer off for 60 seconds, then turn it back on.
Read the supporting manualSafety with AE3: Unplug the dryer rather than just powering off at the panel if you will reach behind it. Do not open the control panel.
Read the supporting manualtE3 (Temperature errors) differs from AE3 by a single character, and Samsung lists it as a separate entry for this dryer. The same characters also appear on a washer, where Samsung ties it to Communication Error. Check which appliance you are standing in front of.
Read the supporting manualSamsung's washer page lists "AE3 - DR Ready Modem Error" among the washer errors with no specific steps, and also includes AE3 in its washer Communication Error row.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Manufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for AE3 is printed as: "Communication errors (AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC)" (TSG10001006, web article).
Samsung says the dryer's internal components cannot communicate with each other.
No. Samsung's printed step is a 60-second power-off and restart. Service is for a code that remains.
That is Samsung's printed wait before turning the dryer back on. A full minute lets the control power down completely.
Samsung does not say. A brief power glitch is a reasonable thing to note, because a restart after the 60 seconds is the printed fix.
The same characters also appear on a washer, where Samsung ties it to Communication Error. Check which appliance you are standing in front of.
Samsung's washer page names AE3 a DR Ready Modem Error. Its dryer page lists AE3 only as a Communication error: internal components cannot communicate. Shut the dryer off for 60 seconds, then turn it on.
Samsung's line for Communication errors prints 9 strings, and AE3 is number 6, right after AE4 and right before AE5.
Samsung codes, symptoms, parts, house calls
AC is a communication error on a Samsung dryer: its internal components cannot communicate with each other. Shut the dryer off for 60 seconds and turn it back on. Book a technician with us if the code remains.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.