Samsung dishwasher 4C / Water and drain

Samsung dishwasher
error 4C

Dishwasher / display reference4C

4C is Samsung's water supply error on a dishwasher: it is not getting water at the pressure or temperature it needs. Samsung points to its water supply requirements guide. Book a technician with us if it persists.

Also shown as 4C

Last reviewed

Dishwasher / display reference4C
Meaning
4C is Samsung's water supply error on a dishwasher: it is not getting water at the pressure or temperature it needs. Samsung points to its water supply requirements guide. Book a technician with us if it persists.
Who handles it
Check, then book
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher 4C means.

What it means

4C is Samsung's water supply error on a dishwasher: it is not getting water at the pressure or temperature it needs. Samsung points to its water supply requirements guide. Book a technician with us if it persists.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

4C returns with the supply meeting those requirements.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher 4C: A gloved, wet hand lifts the cylindrical mesh filter out of the dishwasher sump, with a little water in the basin below and a spray arm lying aside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 4C one character at a time: Samsung writes it with the digit 4 and a capital C.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Open the shutoff valve

    Make sure the valve under the sink is fully open.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the supply line

    Look for kinks along the line to the dishwasher.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Compare with the requirements

    Samsung's water supply requirements guide lists the pressure and temperature the dishwasher needs.

Still showing 4C?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung dishwasher reporting with 4C?

For 4C, Samsung says the dishwasher is not getting water at the pressure or temperature it needs, and refers to its dishwasher water supply requirements guide.

Read the supporting manual

What should I check before I book a visit?

With 4C showing, check that the shutoff valve is fully open and the supply line is not kinked, and compare your supply with Samsung's requirements guide.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Shut off the supply and the power before you disconnect the line, and keep a towel under it.

Read the supporting manual

How is 4C different from the codes near it?

The same characters also appear on a washer, where Samsung ties it to Not filling error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for 4C is printed as: "4C, 4E - Water supply error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with 4C?

Samsung says the dishwasher is not getting water at the pressure or temperature it needs, and refers to its dishwasher water supply requirements guide.

Does this code mean the dishwasher is broken?

Not necessarily. Samsung describes it as the supply not meeting the dishwasher's needs, and sends you to its requirements guide.

What are the supply requirements?

Samsung's page refers to a separate water supply requirements guide for the pressure and temperature the dishwasher needs; the numbers are not repeated in the code article.

Where is the shutoff valve?

Usually under the kitchen sink, on the supply line that feeds the dishwasher. Turn it fully open and look for a kinked line behind the dishwasher.

Does 4C mean the same on a washer?

The same characters also appear on a washer, where Samsung ties it to Not filling error. Check which appliance you are standing in front of.

Do I need a visit for 4C?

If the supply meets the requirements and the code stays, book a visit with us.

Which other strings does Samsung print with it?

Samsung's line for Water supply error prints 2 strings in this order: 4C, 4E. 4C is number 1 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.