Samsung dishwasher SC / Water and drain

Samsung dishwasher
error SC

Dishwasher / display referenceSC

SC is Samsung's drain error on a dishwasher: it can't drain. Samsung points to its not-draining guide. Check the drain hose and filter, and book a technician with us if the water stays.

Also shown as SC

Last reviewed

Dishwasher / display referenceSC
Meaning
SC is Samsung's drain error on a dishwasher: it can't drain. Samsung points to its not-draining guide. Check the drain hose and filter, and book a technician with us if the water stays.
Who handles it
Check, then book
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher SC means.

What it means

SC is Samsung's drain error on a dishwasher: it can't drain. Samsung points to its not-draining guide. Check the drain hose and filter, and book a technician with us if the water stays.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

Water still stands in the tub after those checks.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher SC: A gloved, wet hand lifts the cylindrical mesh filter out of the dishwasher sump, with a little water in the basin below and a spray arm lying aside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with SC one character at a time: Samsung writes it with a capital S and a capital C.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the drain hose

    Look for kinks along the hose to the sink or disposal.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the filter

    Remove debris from the filter at the bottom of the tub.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the sink

    Run the sink to see that it drains; a blocked sink or disposal stops the dishwasher draining.

Still showing SC?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung dishwasher reporting with SC?

For SC, Samsung says the dishwasher can't drain, and refers to its guide for a dishwasher that is not draining.

Read the supporting manual

What should I check before I book a visit?

Check for a kinked drain hose and a clogged filter, and see whether the sink or disposal is backed up. Follow Samsung's not-draining guide.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Standing water can reach electrical parts. Switch off at the breaker and bail out water before you reach into the tub.

Read the supporting manual

How is SC different from the codes near it?

5C differs from SC only by a look-alike character, S against 5. Samsung lists both under Drain error, so they carry the same meaning. The same characters also appear on a washer, where Samsung ties it to No drain error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for SC is printed as: "5C, SC, 5E, SE - Drain error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with SC?

Samsung says the dishwasher can't drain, and refers to its guide for a dishwasher that is not draining.

Is the sink connected to this?

The dishwasher drains through the household drain, so a blocked sink or disposal is a place to look.

Where does a dishwasher drain to?

Into the household drain, usually through a hose that runs to the sink drain or the garbage disposal. A blocked disposal or a squashed hose can therefore stop the dishwasher draining even when the dishwasher itself is fine.

Is it safe to run the dishwasher again with water standing in it?

Better not to. Samsung's own advice is to troubleshoot before you reset or clear a code, so find out why the water stays before you start another cycle.

Is SC the same as 5C?

5C differs from SC only by a look-alike character, S against 5. Samsung lists both under Drain error, so they carry the same meaning.

Do I need a visit for SC?

If the hose, filter and sink are clear and water still stays, book a visit with us.

Which other strings does Samsung print with it?

Samsung's line for Drain error prints 4 strings in this order: 5C, SC, 5E, SE. SC is number 2 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.